Anchoring and Bedding

  • Everbuild-203-Accelerator-&_Frostproofer

    203 Accelerator & Frostproofer

    203 Accelerator & Frostproofer is effective even in sub-zero temperatures and can also be used in normal temperatures where a rapid set is required and as a plugging admixture.

  • Everbuild-Anchorset-Green

    Anchorset Green 150

    Versatile in use, Anchorset Green 150 is suitable for fixing wall ties, starter bars, studs, bolts or large screws in a wide range of substrates including brickwork, concrete, masonry, stone and PFA blocks.

  • Everbuild-Anchorset

    Anchorset Red 380P

    Versatile in use, Anchorset Red 380P is suitable for fixing wall ties, starter bars, studs, bolts or large screws in a wide range of substrates including brickwork, concrete, masonry, stone and PFA blocks.

  • The official logo of FOSROC

    Cebex Cable Grout Plus

    Cebex Cable Grout Plus is an all fines admixture containing expansive cement which impart controlled expansion in the plastic state whilst minimizing water demand.
    The material is designed to allow uniform mixing, and eliminates unwanted segregation and bleeding.

  • The official logo of FOSROC

    Conbextra AT

    Conbextra AT, with the addition of a controlled amount of clean water produces a free-flowing grout with high early and ultimate strengths as well as long term durability, suitable for use in section thicknesses 10mm to 100mm.

    Thicker sections can be achieved by incorporating clean, dry 10mm aggregate.

  • The official logo of FOSROC

    Conbextra AT+

    Conbextra AT+, with the addition of a controlled amount of clean water produces a free-flowing grout with high early and ultimate strengths as well as long term durability, suitable for use in section thicknesses 10 mm to 100 mm.

    Thicker sections can be achieved by incorporating clean, dry 10mm aggregate at a ratio of up to 1:1 depending on aggregate shape and quality.

  • The official logo of FOSROC

    Conbextra EP10LV

    Conbextra EP10LV is designed for injecting into cracks, honeycombs and construction joints ranging from 0.25mm to 9mm.

    High mechanical strength
    Excellent adhesive strength
    Two part system
    Non shrink
    Chemical resistant

  • The official logo of FOSROC

    Conbextra EP10TG

    Conbextra EP10TG is an all liquid system consisting of base and hardener.

    Excellent durability – high strengths
    Cost effective Conbextra EP10TG
    User friendly- simple, full pack mixing
    Versatile – suitable for a wide range of loading situations
    Excellent in service performance – non-shrink

  • Fosroc-Conbextra-EP120

    Conbextra EP120

    Conbextra EP120 is supplied as a three component system consisting of base, hardener and specially graded aggregate.

    Excellent durability – high strengths
    Cost effective
    User friendly – simple full pack mixing
    Versatile – suitable for a wide range of loading situations
    Excellent in service performance – non-shrink

  • The official logo of FOSROC

    Conbextra EP300

    Conbextra EP300 three component system consisting of base resin, liquid hardener and specially graded inert fillers are supplied in the correct mix proportions designed for whole pack mixing on site and no other materials should be added.

  • The official logo of FOSROC

    Conbextra EP75

    Conbextra EP75 is designed for grouting of gap widths of 10 to 75 mm. It is supplied as a three component system consisting of base, hardener and specially graded aggregate.

    The components are supplied in the correct mix proportions designed for whole pack mixing on site.

  • The official logo of FOSROC

    Conbextra GV

    Conbextra GV features high strengths, great fluidity and self-levelling.

    It is used for free flow precision grouting in a wide range of applications. These critical uses include heavy duty support beneath machine base plates, bridge bearing and crane rails.