Concrete Additives, Agents & Formwork Treatments

  • Everbuild-201-Mortar-Mix

    201 Mortar Admix

    201 Mortar Admix improves workability and freeze/thaw resistance in brick laying mortars, reduces the need for lime and smoothes out variations between separate batches of sand and cement.

  • Everbuild-203-Accelerator-&_Frostproofer

    203 Accelerator & Frostproofer

    203 Accelerator & Frostproofer is effective even in sub-zero temperatures and can also be used in normal temperatures where a rapid set is required and as a plugging admixture.

  • Everbuild-206-Strike-Release-Oil

    206 Strike Release Oil

    206 Strike Release Oil is suitable for most types of form work including potable water structures, not affected by rain after application.

  • Everbuild-207-Zeromix-C.F.F.

    207 Zeromix CFF

    207 Zeromix CFF

  • Everbuild-409-Block-Guard

    409 Block Guard

    409 Block Guard is designed to form a durable seal over block paving and other mineral paving/flags.
    The material penetrates deeply into blocks and sand then cures by solvent evaporation to give a long lasting seal which is resistant to sunlight, water, oil and petrol.

  • Everbuild-501-PVA-Bond

    501 PVA Bond

    501 PVA Bond has been designed specifically for use in the building industry as a general purpose bonding agent, and additive for concrete and plasters and as a multi-use adhesive.

  • Everbuild-503-SBR-Bond

    503 SBR Bond

    503 SBR Bond has been designed specifically for use in the building industry as a general purpose bonding agent, and additive for concrete and plasters and as a multi-use adhesive.

  • The official logo of GRACE

    ADVA 115

    ADVA 115 superplasticiser is a high range water-reducing admixture designed to impart extremely high workability to readymixed concrete and to yield excellent workability retention to enable large or difficult pours to be made.

    ADVA 115 superplasticiser is synthetic based and is manufactured under closely controlled conditions to give a consistent product.

  • The official logo of GRACE

    ADVA 150

    ADVA 150 is designed to impart extremely high workability to ready mixed concrete and to yield excellent workability retention to enable large or difficult pours to be made.

    ADVA 150 is wholly synthetic and is manufactured under closely controlled conditions to give a consistent product. It is based on a synthetic carboxylated polymer.

  • The official logo of GRACE

    ADVA Cast 520

    ADVA Cast 520 is designed to yield extremely high water reduction, which in turn enables concrete mixes to achieve dramatically increased early age compressive early strengths as needed by the precast industry.

  • The official logo of GRACE

    ADVA Cast 550

    ADVA Cast 550 is a high efficiency, low dosage, superplasticising admixture designed to impart extremely high workability to concrete, enabling large or difficult pours to be made with little or no vibration and to achieve high compressive early strengths as requested by the precast industry

  • The official logo of GRACE

    ADVA Cast 553

    ADVA Cast 553 allows large reductions in the free water content of the concrete to be made. The air entraining properties of ADVA Cast 553 enable it to entrain controlled quantities of air bubbles for optimum spacing and diameter to give durability under freeze/thaw conditions.

    ADVA Cast 553 is formulated from carefully selected raw materials and is manufactured under controlled conditions to give a consistent product.

  • The official logo of GRACE

    ADVA Cast 560

    ADVA Cast 560 is designed to yield high range water reduction, short setting time and very high early compressive strength as required by the precast industry.

    ADVA Cast 560 is based on a synthetic carboxylated polyether, and conforms to: EN 934-2: Part 2 and ASTM C494-Type F.

  • The official logo of GRACE

    ADVA Cast 570

    ADVA Cast 570 has been designed to impart extremely high workability to concrete, enabling large or difficult pours to be made with little or no vibration and to achieve high compressive early strengths as required by the precast industry.

    ADVA Cast 570 is an EO/PO polycarboxylate comb-polymer superplasticiser and conforms to: EN 934 : Part 2 and ASTM C494 – Type F.

  • The official logo of GRACE

    ADVA Floor 200

    ADVA Floor 200 is designed to impart neutral set and improvements in finishing properties to concrete, enabling placement of concrete and powerfloating operations to be carried out more easily.

    ADVA Floor 200 is based on a synthetic carboxylated polymer and is manufactured under closely controlled conditions to give a consistent product.

  • The official logo of GRACE

    ADVA Floor 250

    ADVA Floor 250 is a new generation flooring admixture, which combines the workability and strength enhancing properties of polycarboxylate technology with proven Grace shrinkage reducing performance.

    This unique and patented technology is designed to impart dramatic improvements in workability, finishing properties and ultimate in-place performance of concrete floors.

  • The official logo of GRACE

    ADVA Flow 340

    ADVA Flow 340 is designed to impart extremely high consistence and enable the production of self compacting concrete.

    The material is based on next generation modified synthetic carboxylated polymers and offers concrete producers the advantages of the latest advances in concrete technology.

  • The official logo of GRACE

    ADVA Flow 341

    ADVA Flow 341 is designed to impart extremely high workability and enable the production of self compacting concrete.

    ADVA Flow 341 is based on a modified synthetic carboxylated polymer and is manufactured under closely controlled conditions to give a consistent

  • The official logo of GRACE

    ADVA Flow 350

     ADVA Flow 350 is designed to impart extremely high workability and enable the production of self compacting concrete.

    ADVA Flow 350 is based on a modified synthetic carboxylated polymer and is manufactured under closely controlled conditions to give a consistent product.

  • The official logo of GRACE

    ADVA Spray 1100

    ADVA Spray 1100 is designed for use in wet mix Sprayed Concrete applications.

    The product is manufactured under rigid controls to ensure uniform and predictable performance.

  • The official logo of GRACE

    AIRALON

    Airalon is an aqueous solution of neutralized hydroaromatic and fatty carboxylic acids with the following specifications.

    Airalon is one of the most effective air-entraining additives yet developed for use in the manufacture of air-entraining portland cement and masonry cements.

  • Everbuild-All-Purpose-Filler

    All Purpose Filler

    When applied as directed, the All Purpose Filler dries to a smooth but tough crack resistant sandable finish, which may be painted, papered or stained.

  • Everbuild-All-Purpose-Filler

    All Purpose Filler Easi Squeeze

    When All Purpose Filler Easi Squeeze is applied as directed, the filler dries to a smooth but tough crack resistant sandable finish that may be painted, papered or stained.

    This filler is suitable for both internal and external use.

  • Everbuild-All-Purpose-Filler

    All Purpose Powder Filler

    Due to the high levels of added PVA powder, All Purpose Powder Filler will not shrink or crack and is strong enough to accept nails and screws.

  • The official logo of GRACE

    CBA

    The CBA series of additives is a new concept in grinding aids – significantly different from any previous Grace product for the cement industry.

    The difference is that it is a “Grinding Aid Plus”. CBA additives offer all the benefits of traditional grinding aids, such as increased grinding efficiency and cement flowability.

  • The official logo of Flexcrete

    Chemical Release Agent

    Chemical Release Agent is specially formulated for use with the repair mortars on most types of formwork to give the optimum release and quality of surface finish.

  • The official logo of FOSROC

    Concure RB90

    Concure RB90 is applied, by spray, to fresh cementitious surfaces at a coverage rate of 3.5 to 5.0 m2 per litre.

    It creates a continuous film-forming, moisture barrier; which ensures optimum cement hydration, improved concrete durability and reduced shrinkage.

  • The official logo of FOSROC

    Conplast 13

    Conplast 13 is a specially formulated pumping aid for lightweight concrete incorporating Lytag coarse aggregate.

    It is supplied as a brown powder consisting of a blend of powerful dispersion and thickening agents.

  • The official logo of FOSROC

    Conplast AE316

    Conplast AE316 acts at the interface between the mixing water and cement/aggregate particles to produce microscopic air bubbles, which are evenly distributed throughout the concrete.

    The entrained air enhances durability by providing protection against the rapid temperature changes found in freezing and thawing conditions and with the use of de-icing salts.

  • The official logo of FOSROC

    Conplast AE380

    Conplast AE380 is a chloride free air entraining admixture based on synthetic surfactant materials.

    It is supplied as a colourless solution which instantly disperses in water. The product acts at the interface between the mixing water and cement/aggregate particles to produce microscopic air bubbles, which are evenly distributed throughout the concrete.

  • The official logo of FOSROC

    Conplast AE383

    Conplast AE383 acts at the interface between the mixing water and cement/aggregate particles to produce microscopic air bubbles, which are evenly distributed throughout the concrete.

    The entrained air enhances durability by providing protection against the rapid temperature changes found in freezing and thawing conditions and with the use of de-icing salts.

  • The official logo of FOSROC

    Conplast Drymix 1

    Conplast Drymix 1 is specially formulated for optimum performance with modern concrete block paving and masonry production equipment.

    It disperses the fine particles in the mix and produces a rheological flow as moulds are filled and compacted.

  • The official logo of FOSROC

    Conplast Drymix 3

    Conplast Drymix 3 is specially formulated for optimum performance with modern concrete block paving and masonry production equipment.

    It disperses the fine particles in the mix and produces a rheological flow as moulds are filled and compacted.

  • The official logo of FOSROC

    Conplast Drymix 5

    Conplast Drymix 5 is used to accelerate stiffening and early hardening of concrete and mortar that do not contain embedded metal.

  • The official logo of FOSROC

    Conplast F294

    Conplast F294 is a concentrated solution of selected surfactants.

    When used with a Conplast Foam Generator and a suitable water supply, Conplast F294 produces a consistent pre-foam that is stable under alkaline conditions and suitable for use in the production of foamed concrete.

  • The official logo of FOSROC

    Conplast M1

    Conplast M1 chloride-free superplasticising admixture is based on sulphonated melamine polymers.

    It is supplied as a clear solution which instantly disperses in water.