Concrete Refurbishment & Protection

  • Everbuild-203-Accelerator-&_Frostproofer

    203 Accelerator & Frostproofer

    203 Accelerator & Frostproofer is effective even in sub-zero temperatures and can also be used in normal temperatures where a rapid set is required and as a plugging admixture.

  • Everbuild-207-Zeromix-C.F.F.

    207 Zeromix CFF

    207 Zeromix CFF

  • Everbuild-501-PVA-Bond

    501 PVA Bond

    501 PVA Bond has been designed specifically for use in the building industry as a general purpose bonding agent, and additive for concrete and plasters and as a multi-use adhesive.

  • The official logo of Everbuild

    505 Plasterers Gripcoat

    505 Plasterers Gripcoat

  • The official logo of Everbuild

    507 Rendagrip

    507 Rendagrip

  • Anti Carbonation Paint

    Anti Carbonation Paint features a micro-porous structure within the coating that works to act as a barrier to the ingress of Chlorides and Carbon Dioxide and other acid gases, but allows the passage of water vapour from the substrate.

    The elastomeric nature of Anti Carbonation Paint ensures good crack bridging properties, in case of structural movement.

  • Aquatek Plug XS

    Aquatek Plug XS is a fast setting plugging mortar with extended set time.

  • ARDEX-A45

    Ardex A45

    Ardex A45 is a rapid drying and hardening, slump free mortar for internal repairs. The mixed mortar sets after 15 minutes and can be trafficked after just 11/2 hours regardless of thickness at 20°C.

  • ARDEX-A46

    Ardex A46

    Ardex A46 is ideal for the rapid repair and refacing of concrete surfaces.

    The material should only be used for the non-structural repair of concrete.

  • The official logo of Belzona

    Belzona 4111

    Belzona 4111 is a fast curing, 3-part epoxy repair composite designed for repair, resurfacing and protection of concrete and stone.

    This material provides outstanding chemical and abrasion resistance and protection from environmental attack, simplifying maintenance procedures.

  • The official logo of Belzona

    Belzona 4131

    Belzona 4131 is a non-porous, 2-part epoxy repair composite designed for resurfacing and protecting large areas of concrete, stone and many other surfaces.

  • The official logo of Belzona

    Belzona 4141

    Belzona 4141 is a lightweight epoxy repair composite for rebuilding damaged vertical and overhead concrete and masonry surfaces.

  • The official logo of Belzona

    Belzona 4181

    Belzona 4181 is a 3-part epoxy repair composite designed for the repair, resurfacing and protection of concrete and stone subject to impact, abrasion, heat and chemical attack.

  • The official logo of GRACE

    BETEC NSM

  • Bonding Bridge 842

    Bonding Bridge 842 is an advanced, polymer modified, cementitious surface impregnant with high penetration into concrete.

    Bonding Bridge 842 further increases the adhesion of repair mortars and prevents rapid drying at the concrete interface on porous backgrounds with high suction.

  • Bonding Primer

    Bonding Primer is the latest technology, rapid curing, water based product consisting of an acrylic copolymer modified with a unique water-emulsified epoxy cross-linking agent.

    The material is inherently hydrophobic and alkali resistant, making it ideal for application to a wide range of new and aged mineral substrates.

  • The official logo of Flexcrete

    Cemprotec MCI 2020

    Cemprotec MCI 2020 is a clear, water based, organic surface treatment for existing concrete structures.

    Based on time proven corrosion inhibiting technology, it has been specially formulated to migrate into concrete, by liquid and vapour diffusion, to form a protective monomolecular layer on steel reinforcement, which helps to reduce corrosion.

  • The official logo of Flexcrete

    Cemprotec Scrim

    Cemprotec Scrim is a latex coated open weave glass scrim with excellent resistance to alkaline environments.

    The material is self-adhesive and will adhere directly to steel substrates.

  • The official logo of BASF

    Concresive 1380

    CONCRESIVE 1380 main uses are for structurally rebonding cracked concrete sections, for filling porous or honeycombed concrete or grout and for anchoring bolts, dowels and reinforcing bars.

  • The official logo of Everbuild

    Contractors PVA

    contractors pva

  • The official logo of FOSROC

    Dekguard Clear

    Dekguard Clear is used to protect atmospherically exposed reinforced concrete structures from attack by acid gases, chloride ions, sulphates, oxygen and water.

    The product is also suitable to protect other cementitious substrates and masonry.

  • The official logo of FOSROC

    Dekguard Elastic

    Dekguard Elastic is used to protect atmospherically exposed reinforced concrete structures from attack by acid gases, chloride ions, oxygen and water, especially where there is a danger of subsequent cracks appearing within the substrate.

    The product is also suitable to protect other cementitious substrates and masonry.

  • The official logo of FOSROC

    Dekguard S

    Dekguard S is used to protect atmospherically exposed reinforced concrete structures from attack by acid gases, chloride ions, sulphates, oxygen and water.

    The product is also suitable to protect other cementitious substrates and masonry

  • The official logo of FOSROC

    Dekguard Textured

    Dekguard Textured is used to enhance the appearance of exposed reinforced concrete. Suitable for use on all types of structures both new and existing.

    The material is a component of the Renderoc system of concrete reinstatement.

  • Dekguard W

    Dekguard W is used to protect atmospherically exposed reinforced concrete structures, cementitious substrates and masonry from aggressive elements, weathering and rain.

    The product is also suitable for use on all types of structures, including those in coastal environments. It is equally suitable for new and existing structures.

  • The official logo of FOSROC

    Ebofix Grout

    Ebofix Grout is supplied as a ready to use dry powder requiring only the addition of a controlled amount of clean water to produce a thixotropic non-shrink grout.

    The material is a high alkalinie grout based on Portland cements and additives which impart controlled expansion in the plastic state whilst minimising water demand.

  • The official logo of Vector Corrosion Technologies

    Ebonex

    Ebonex utilizes an innovative ceramic/titanium composite, combined with an integral gas venting system.

    The anode system includes Ebofix grout, a high density, acid buffering grout used for long-term performance.

  • The official logo of BASF

    Emaco CP 30 Anode

    EMACO CP 30 ANODE is a unique, water based, one component anode coating specifically designed for steel reinforced concrete structures which are suffering ongoing corrosion damage, or require protection against future corrosion initiation.

    The material contains highly conductive coated fibres which provide superior current distribution and mechanical properties resulting in an enhanced anode life.

  • The official logo of BASF

    Emaco CP 60 Anode

    EMACO CP 60 ANODE is a unique two component highly durable anode designed specifically for impressed current cathodic protection of steel reinforced concrete structures which have active corrosion.

  • The official logo of BASF

    Emaco CP Overlay

    EMACO CP ANODE OVERLAY is a highly durable, wet spray applied encapsulating overlay for use with mesh anodes in impressed current cathodic protection of steel reinforced concrete structures.

  • The official logo of BASF

    Emaco R232

    EMACO R232 may be applied in layers 2 – 10 mm deep, is used to produce a fair face finish to new concrete or as part of a concrete repair system.

  • The official logo of BASF

    Emaco R340

    EMACO R340 is based on a blend of selected cements, high-grade quartz sands and other active ingredients, it is modified with alkali-compatible synthetic admixtures.

  • The official logo of BASF

    Emaco S103

    EMACO S103 is supplied ready to use requiring only the addition of potable water to produce a shrinkage compensating, free flowing concrete suitable for placing in nominal thickness’ in excess of 25mm.

  • The official logo of BASF

    Emaco S80

    EMACO S80 is reinforced with polypropylene fibres, shrinkage compensated, impermeable and extremely durable even in aggressive ambients.

    It has a high bond to steel and is chloride free.

  • The official logo of BASF

    Emaco S87HB

    EMACO S87HB, when mixed with the correct amount of water, provides a rheoplastic, non-segregating high build mortar, with excellent bond to steel reinforcement and to concrete.

  • EMACO S88 C

    Emaco S88C

    EMACO S88C, when mixed with the correct amount of water, provides a rheoplastic, non-segregating high strength mortar, with excellent bond to steel reinforcement and to concrete.