Flooring Solutions

  • Norcros 2-Part-Levelling-Compound

    2-Part Levelling Compound

    Norcros 2-Part Levelling Compound is suitable for use from feather edge to 10mm in one application without the need for additional granite chippings.

  • Everbuild-203-Accelerator-&_Frostproofer

    203 Accelerator & Frostproofer

    203 Accelerator & Frostproofer is effective even in sub-zero temperatures and can also be used in normal temperatures where a rapid set is required and as a plugging admixture.

  • Everbuild-403-Concrete-Hardener-&-Dustproofer

    403 Concrete Hardener and Dustproofer

    Internal and external use. 403 Concrete Hardener and Dustproofer

    Fast acting.
    Leaves a residual surface to prevent further dusting.
    Helps prevent bloom/efflorescence.

  • Everbuild-708-Self-Level-Floor-Compound

    708 Self Level Floor Compound

    708 Self Level Floor Compound provides a free flowing mix that sets in 90 minutes and can be overlaid after only 8 hours at normal temperatures.

  • Everbuild-709-Floor-Flex-Plus

    709 Floor Flex Plus

    709 Floor Flex Plus is ideal for use when covering sound timber floors.

    A 5 litre container is sufficient to mix a 20 kilo bag of Self Level Floor Compound or adhesive.

  • Everbuild-710-Self-Level-Floor-Compound

    710 Self Level Flexiplus

    Enhanced flow properties coupled with long open time giving easy trowelling.
    Fast setting – sets in 8 hours.
    Up to 6mm in depth in one coat.
    Protein (casein) free.
    Internal/external use. 710 Self Level Flexiplus

  • Everbuild-Deep-Fill-750

    750 Deep Fill

    750 Deep Fill sets in 3 hours and can be overlaid after only 12 hours. 750 Deep Fill

  • decking-cleats

    Anti Slip Decking Cleats

    Wooden decking and ramps can be hazardous in the wet or become slippery with algae in shady or damp conditions; damp, slippery timber can be made safer instantly using Anti-Slip Decking Cleats.

  • The official logo of The Anglo Building Solutions

    Anti Slip Edge Sealer

    Anti Slip Edge Sealer may be used to seal and help protect the edges of Anti-Slip Tape and Anti-Slip Tread in wet or heavy wear conditions.

  • The official logo of The Anglo Building Solutions

    Anti Slip Primer

    Anti-Slip Primer for Anti-Slip Tape and Anti-Slip Treads, it improves adhesion especially on porous surfaces.

  • step-covers

    Anti Slip Step Covers

    Anti Slip Step Covers is highly versatile, heavy duty pre-formed step covers and nosing. Robust GRP provides a corrosion resistant surface for damaged, worn or slippery steps.

  • anglo-anti-slip-tape

    Anti Slip Tape

    Anti Slip Tape provides instant anti-slip surfaces for steps, ramps, floors, vehicles, boats etc.

  • anglo-anti-slip-treads

    Anti Slip Tread

     Anti Slip Tread is easily applied to most smooth surfaces, they provide an anti-slip finish to improve safety on concrete, metal or wood surfaces.

  • The official logo of The Anglo Building Solutions

    Anti Slip Tread Roll

    Anti Slip Tread Roll is easily applied to most smooth surfaces, they provide an anti-slip finish to improve safety on concrete, metal or wood surfaces.

  • ARDEX-A-23

    Ardex A 23 Screed

    Ardex A 23 Screed is a special cement for producing a rapid hardening floor screed for internal use which allows ceramic tiles to be fixed after 48 hours, natural stone after 72 hours, and resilient floor coverings after 6 days.

    Ardex A 23 Screed is used to produce bonded, unbonded and floating screeds in internal locations where early foot traffic is required and where rapid drying is essential, e.g. to allow ceramic/porcelain tiles to be laid after 48 hours.

  • Ardex A 38

    Ardex A 38 Screed

    Ardex A 38 Screed is a special cement for producing a rapid setting, rapid hardening and rapid drying floor screed for internal or external use, including swimming pools, allowing ceramic tiles or stone to be fixed after only 4 hours, even on unbonded and floating screeds.

    After only one day the compressive strength and tensile bending strength of an Ardex A 38 Screed exceeds the acceptable minimum attained by an ordinary cement screed after 28 days and is also dry, irrespective of thickness.

  • Ardex A 46

    Ardex A 46

    Ardex A 46 is a rapid repair, slump free mortar which is ideal for external and internal repairs.

    The polymer modified mortar sets and hardens rapidly to give a repair of high performance, strength and hardness. Ardex A 46 is ideal for the rapid repair and refacing of concrete surfaces.

  • ARDEX-A35

    Ardex A35

    Ardex A35 can be used to produce a bonded screed, an unbonded floor screed laid onto a membrane, or a floating floor screed laid onto a compressive quilt/insulating material.

  • ARDEX-A35-Mix

    Ardex A35 Mix

    Ardex A35 Mix can be used to produce a bonded screed, an unbonded floor screed laid onto a membrane, or a floating floor screed laid onto a compressive quilt/insulating material.

  • ARDEX-A55

    Ardex A55

    Ardex A55 is a grey powder with special cements and dispersible synthetic materials.

    When mixed with water, an exceptionally fluid, flexible self-levelling mortar is produced which can be applied from a feather edge up to the required thickness in a single operation.

  • ARDEX-AF100

    Ardex AF100

    Ardex AF100 is designed for adhering PVC sheet and tile floorcoverings.

    The material is designed for use on hard, clean, dry, sound and smooth sub-floors such as levelled and smoothed concrete and sand/cement screeds, latex and water-based levelling and smoothing compounds, terrazzo, plywood, hardboard and flooring grade chipboard.

  • The official logo of ARDEX

    Ardex AF150

    Ardex AF150 is also suitable for use over normal underfloor heating systems.

    It is designed for adhering PVC/vinyl floorcoverings including sheet and tiles with foam and PVC backings.

  • ARDEX-AF200

    Ardex AF200

    Ardex AF200 is ideal for the installation of fleece backed matting to timber, concrete and sand/cement screed subfloors.

    Unlike traditional powder adhesives, Ardex AF200 has a high initial grab, which allows tiles to be fixed immediately, is ready mixed and easy to apply and comes in a resealable container.

  • ARDEX-AF2300

    Ardex AF2300

    Ardex AF2300 is designed for use on sub-floors such as smoothed and levelled concrete and sand/cement screeds, water-based levelling and smoothing compounds and terrazzo.

  • ARDEX-AF-2510

    Ardex AF2510

    Ardex AF2510 is water resistant when fully cured and is virtually emission free enabling thin PVC floorcoverings to be installed without bubbling.

    It is smooth and easy to trowel with small or large notched trowels for PVC and large format hardwood boards.

  • ARDEX-AF650

    Ardex AF650

    Ardex AF650 can be used for fixing PVC and rubber floorcoverings, flexible stair nosings, PVC and rubber skirtings, stair stringers and cork with natural cork backing.

    It can be used on or over smoothing underlayments, cement/sand screeds, concrete, plasterboard, plaster, flooring grade chipboard, wood, hardboard, plywood, alloys, steel and repair products.

  • ARDEX-AF700

    Ardex AF700

    Ardex AF700 has been specially formulated to provide excellent long term shear strength to compliment the properties of linoleum sheet and tile floorcoverings.

    It also has significantly improved moisture resistance compared to traditional lignum paste type adhesives.

  • ARDEX-AF890

    Ardex AF890

    Ardex AF890 is designed for adhering floorcoverings with felt, bitumen, PVC and other polymer backings and is ideal for carpet tiles.

    It is also designed for use on sub-floors such as raised access flooring, concrete, sand/cement screeds, latex and water-based levelling and smoothing compounds, terrazzo, plywood, hardboard and flooring grade chipboard.

  • ARDEX-AM100

    Ardex AM100

    Ardex AM100 is a grey powder consisting of special cements, polymers and selected fillers. It can be applied from 2mm up to 20mm in thickness in one application.

    The mixed mortar can be used in situations where the normal drying time of conventional cement/sand renders cannot be accommodated.

  • ARDEX-D20

    Ardex D20

    Ardex D20 is for fixing ceramic tiles and mosaics to gypsum plaster, paper faced plasterboards, concrete, cement and sand renders, rigidly braced and stable sheets and boards, e.g. plywood, chipboard, fibre building boards and other absorbent backgrounds, as well as fixing porous tiles to existing ceramic tiling.

  • ARDEX-D30

    Ardex D30

    The characteristics of Ardex D30 are high adhesion strength after water immersion and high adhesion strength after exposure to elevated temperatures making this product ideal for use in commercial and domestic showers, kitchens and bathrooms.

  • ARDEX-F4

    Ardex F4

    Ardex F4 can be used with the addition of a mortar admix to produce tile joints with improved elasticity and water repellency.

  • ARDEX-FA20

    Ardex FA20

    Ardex FA20 can be applied to timber floors, flooring grade asphalt and existing substrates with adhesive residues.

    The material can normally be walked on after approximately 2 hours at 20°C.

  • ARDEX-Feather-Finish

    Ardex Feather Finish

    Ardex Feather Finish drys rapidly and provides a high bond to concrete, plywood, cement/sand screeds, existing sub-floor smoothing compounds and even existing ceramic tiles without the use of primers.

  • ARDEX-GK

    Ardex GK

    Ardex GK has rapid setting and hardening properties and is particularly suitable for grouting ceramic tile joints that have to be exposed to foot traffic within a few hours.

    It is suitable for use with ceramic and natural stone tiles, extruded tiles, brick pavers and floor tiles with ribbed or studded surfaces.

  • Ardex K 39

    Ardex K 39

    Ardex K 39 is an advanced high performance self-smoothing and levelling compound with a market leading extended wet edge and working time.

    The rapid hardening properties of Ardex K 39 mean that it is walkable in as little as 2 hours. Ardex K 39 will level and smooth, in a single application, all uneven internal sub-floors including concrete, cement/sand screeds, anhydrite screeds etc.