Grouting, Anchoring and Bedding

  • The official logo of Sika

    SikaScreed Hardtop 80

    SikaScreed HardTop 80 is a very rapid setting high strength mortar suitable for industrial and commercial applications, where return to service is critical and high loading capability essential. For minor or major repairs to heavily stressed, industrial concrete flooring with full usability within 24 hours.

  • The official logo of Sika

    SikaGrout 111 GP

    SikaGrout 111 GP is a one part flowable shrinkage compensated general purpose cementitious grout.

  • Sikalastic 618

    Sikalastic 618 is a one-component, cold applied, moisture-triggered polyurethane membrane. It cures to form a seamless and durable waterproofing solution for exposed roof areas and structures.

  • The official logo of Sika

    Sika MonoTop-614F

    Sika MonoTop-614F is a cement based, one component flowable repair mortar (High Flow) containing shrinkage compensators and high range water-reducing agents, meeting the requirements of Class R4 of BS EN 1504-3.

  • Sikalastic 1K

    Sikalastic-1K is a one component, flexible, fibre reinforced mortar, based on cement modified with special alkali resistant polymers.

  • The official logo of FOSROC

    Conbextra LC

    Conbextra LC is designed to be placed by pouring or pumping in:

    Cable grouting in reinforced concrete diaphragm walls
    Grouting of long bolts in rocks, walls…
    Pumping in concrete dams
    Pumping and foundation strengthening
    Pumping of slurry where high strength and durability are required

  • The official logo of FOSROC

    Conbextra Cable Grout

    Conbextra Cable Grout is supplied as a ready to use dry powder requiring only the addition of a controlled amount of clean water to produce a free flowing non-shrink grout.

  • The official logo of FOSROC

    Conbextra BB92

    High flexural strength and modulus elasticity without the addition of fibres
    Quick return to service and removal of temporary supports

    Suitable for pumping or pouring

    High fatigue resistance

    No segregation or bleeding to ensure consistent final physical performance and to prevent pump blockages


  • The official logo of FOSROC

    Cebex Cable Grout Plus

    Cebex Cable Grout Plus is an all fines admixture containing expansive cement which impart controlled expansion in the plastic state whilst minimizing water demand.
    The material is designed to allow uniform mixing, and eliminates unwanted segregation and bleeding.

  • The official logo of FOSROC

    Conbextra SS

    Conbextra SS is suitable for bedding precast units, filling voids and other general grouting applications.

    It can be used at trowelable and flowable consistencies.



  • The official logo of FOSROC

    Conbextra PM

    Conbextra PM is used for structural grouting of gaps in precast units and high strength pointing.
    It is supplied as a single pack cement based pumping mortar, blended from cements, fine aggregates and admixtures with a maximum grain size less than 1mm. It requires only the addition of clean water to produce an easily pumped mortar.

  • The official logo of FOSROC

    Conbextra MF

    Conbextra MF is used for free flow precision grouting in a wide range of applications.

    These critical uses include heavy duty support beneath machine base plates, bridge bearing and crane rails.