Highway Maintenance

  • feb-block & paving sealer

    Aquaseal Protective Block Paving Seal

    AQUASEAL PROTECTIVE BLOCK PAVING SEAL is a non degrading, membrane forming liquid based on an acrylic resin. Once applied it forms a tough, clear seal which will resist oil and fuel spills, fungal growth and protect against weather damage.

    It stabilises the sand within the joints of the block paviours to resist washout.

  • The official logo of BASF

    Aquaseal Tarmac and Asphalt Drive and Path Seal

    AQUASEAL TARMAC AND ASPHALT DRIVE AND PATH SEAL is a Protective & Decorative Treatment for Tarmac & Asphalt.

  • anglo-asphalt-restorer

    Asphalt Restorer

    Asphalt Restorer provides an ‘as new’ appearance that will mask old line markings and repairs and will hide ingrained dust from building works etc.

  • The official logo of Colas


    Bitucrete provides an immediate cure for potholes in car parks, roads, drives, factory floors and many other surfaces.

  • The official logo of Colas


  • The official logo of Colas

    Colbond 50

    Colbond 50 forms a uniform film of polymer modified bitumen on the road surface which promotes a strong adhesive bond between a bituminous overlay and the existing surface.

  • The official logo of Everbuild

    Contractors PVA

    contractors pva

  • The official logo of Flexcrete


    Fastcast is a rapid curing, high strength pourable concrete, specifically designed for bedding of covers and frames, i.e. manholes, hydrants, etc.

  • The official logo of Flexcrete

    Fastfill BM

    Fastfill BM is a single component, Portland cement based compound, which exhibits unique hydraulic properties to produce a rapid curing mortar with enhanced physical properties.

  • The official logo of FOSROC

    Fosroc Geogrid

    Fosroc Geogrid is used as a basal reinforcing element in civil engineering groundwork applications including ground reinforcement, road and railway construction, temporary access roads, erosions control and paved area stabilisation.

  • The official logo of GRACE

    Grace LM50

    Grace LM50 is manufactured from high grade neoprene rubber reinforced with steel channels and a toughened flexible neoprene gland reinforced with a high performance nylon mesh.

  • The official logo of Colas


    Gripstrip consists of a bituminous compound modified with elastomers and fast bonding resins which is extruded and prefabricated.

  • i-fix Drive Revive

    i-fix® Drive Revive®

    i-fix® Drive Revive® allows you to restore dull, faded or tired patios and driveways to their former glory.

    Compatible with both tarmac and concrete, Drive Revive® allows you to repair and improve your outdoor space with ease.

  • i-fix Paving Sealer

    i-fix® Paving Sealer

    i-fix® Paving Sealer is a water-based sealant for use on block paving or slabs with sand joints.

    Easily applied using a watering can, Paving Sealer prevents growth of weeds and stops jointing sand being washed away. Each 5 litre bottle works by binding jointing sand and sealing the paving surface.

  • i-fix Pothole Fix

    i-fix® Pothole Fix

    i-fix® Pothole Fix sets just minutes after application, you are able to drive or walk over the treated area immediately.

    Available in our 20kg tubs, Pothole Fix can be used without any mixing or mess and any remaining product may be resealed for future use.

  • i-fix Pre-wash for Drive Revive

    i-fix® Pre-wash for Drive Revive®

  • i-fix Speedy Concrete

    i-fix® Speedy Concrete

    i-fix® Speedy Concrete is a multi-purpose concrete that fills cracks and holes in no time at twice the strength of regular concrete.

  • i-fix Speedy Paving Grout

    i-fix® Speedy Paving Grout

    i-fix® Speedy Paving Grout is a high-strength flowable mortar, which can be simply poured on the target area to reduce application time.

    Available in our 20kg tubs, this product allows you buy and use only what you need before resealing the rest for later, so reducing waste.

  • Ultracrete-Perma-Soil

    Instarmac Perma-Soil

    Instarmac Perma-Soil can be hand mixed with spoil from a reinstatement before being compacted back into the excavation to provide an adequate backfill material/sub base.

    No special tools or complicated techniques are required. As spoil is excavated Instarmac Perma-Soil is added and left to cure for a short time before reinstatement and compaction. It sets quickly, curing 85% within an hour, 100% within 24 hours.

  • The official logo of Colas

    Jointgrip OB

    Jointgrip OB is a proprietary formulation of blended petroleum bitumen incorporating special abrasive aggregates and polymers to provide a compound of toughness, flexibility, adhesiveness and resistance to flow.

  • The official logo of Colas

    Leocatic Spray

    Leocatic Spray is particularly useful for the construction and maintenance of footways and other low stress sites.

  • The official logo of Colas

    Leochip VLS

    Leochip VLS is ideal for producing a high quality, natural and aesthetically pleasing finish to drives and footpaths.

  • rbs Bedding Mortar

    rbs Bedding Mortar is ideally suited to the reinstatement of manhole frames, runway lights etc., where rapid return to service of heavily trafficked areas is required.

  • rbs Cosmetic Mortar

    rbs Cosmetic Mortar is used for rapid colour matching repairs to in-situ and pre-cast concrete.

  • rbs Rapid Concrete

    rbs Rapid Concrete has high performance and the material exhibits a fast development of physical properties allowing early return to service, especially suitable for heavily trafficked areas.

    It consists of a dry blend of modified Portland Cement and limestone aggregate, with the addition of acrylic polymer.

  • RonaDeck Tree Pit System

    RonaDeck Eco Tree Pit

    RonaDeck Eco Tree Pit is a resin bound natural aggregate finish surround for planted trees in public and private areas.

    Surrounding the tree in a solid yet semiflexible construction allows the tree to grow, prevents a build up of litter and removes a storage or hiding place for hazardous items such as syringes and needles.

  • Stirling Lloyd Safetrack Crack Infill

    A major advantage of Safetrack Crack Infill  is its fast cure and overlaying times across the application temperature range.

    Safetrack Crack Infill is designed for the filling of open cracks in asphalt and concrete substrates.

  • Stirling Lloyd Safetrack HW Patch Pack

    Safetrack HW Patch Pack is suitable for the rapid, permanent reinstatement of damaged of compromised road surfaces or for the reinstatement of anti-skid after maintenance work.



  • Stirling Lloyd Safetrack LM Patch Pack

    Safetrack LM Patch Pack contains all of the necessary materials and equipment to successfully and easily apply the material.

    There are currently two products in the Safetrack LM Patch Pack range:

    Durable – a hard wearing, economical road marking
    Retromax – a solid road marking for highways

  • Stirling Lloyd Safetrack Overbanding



  • Stirling Lloyd Safetrack SC Patch Pack

    Safetrack SC is a liquid applied, fast curing, UV stable, slip resistant road colour coating based on advanced MMA technology.

    The patch pack contains all of the necessary materials and equipment to successfully and easily apply the material.

  • tarmacoat


    Tarmacoat is a tough, flexible acrylic paint for tarmac or asphalt.

  • Ultra Crete Envirobed HA104

    Ultra Crete Envirobed HA104

    Ultra Crete Envirobed HA104 is supplied as a two-component system which contains a blend of special cements, polymer graded aggregates and recycled glass.

    The combined components provide a high performance flowable mortar, which can can grout the pre-levelled frame to the required depth.

  • Ultra Crete EP-R9

    Ultra Crete EP-R9

    Ultra Crete EP-R9 is a two-part high strength epoxy resin mortar and primer system, especially suitable for bedding granite setts, paving elements up to recess covers, tree grids and coping stones as well as concrete repair for areas subject to heavy wear-and-tear.

  • Ultra Crete Flowcon

    Ultra Crete Flowcon

    Ultracrete Flowcon is supplied in 25kg polythene bags and is manufactured from selected cements, sands, aggregates and chemical admixtures.

    The product requires only the addition of water and can be applied to depths of 20mm-200mm in one pass. Ultracrete Flowcon should not be used at temperatures below 5°C during application or initial set.

  • Ultra Crete FP-1

    Ultra Crete FP-1 is a two-component rapid repair mortar, ideal for the reinstatement of small areas such as trip hazards, kerbs and steps where prompt access is required.