Highway Maintenance

  • The official logo of FOSROC


    XR90 is used for bedding levelling and installation of street ironwork and applications which require high early strength to help reduce road closure times.

    XR90 can be used for emergency and general concrete repairs.

  • The official logo of FOSROC

    XR RSC

    XR RSC is supplied as a ready to use blend of cements, graded aggregates and additives.

    It only requires the addition of clean water to form a rapid setting concrete.

  • The official logo of FOSROC

    XR PE20

    XR PE20 for the rapid installation of manhole frames in Type 1 & 2 carriageways.

    For bedding and fixing kerbstones; repairing and re-rpofiling precast units.

  • The official logo of FOSROC

    XR Cobbleset

    XR Cobbleset is used for the rapid pointing of granite setts, pre-cast concrete stone paviours and slabs.

    The product is especially beneficial in heavily pedestrianised areas, where a rapid reopening to the public is required.

  • The official logo of FOSROC

    XR 45

    XR 45 is used for the installation and levelling of street ironwork. It is particularly useful where interruption to traffic flow must be minimised.

    It allows the bedding and installation of manhole frames and gulleys and their return to use in less than 45 minutes.

  • The official logo of weber

    weber.tec cable mortar

    weber.tec cable mortar is for use for gaps 16 mm to 40 mm.

  • weber.tec-bedding-mortar

    weber.tec bedding mortar

    weber.tec bedding mortar is used for the bedding and fixing of manhole frames, airport landing lights, duct frames and precast concrete units.

    It has been formulated for easy mixing and placement, even at low temperatures and, when cured, provides a durable, chemically resistant bedding and fixing material with good bond strength.

  • weber.cem pyrabed

    weber.cem pyrabed

    When weber.cem pyrabed is mixed with water produce fast-setting bedding mortars for the rapid installation of ironwork and highway furniture.

    They can be applied to depth of 10 – 100 mm in one pass and the rapid strength development characteristics allow the road to be opened to traffic between 60 – 90 minutes after placement, dependent on the grade of product selected.

  • The official logo of Instarmac

    Ultra Scape SUDScrete

    Ultra Scape SUDScrete is a porous, open textured sub-base to be used under a decorative resin surface as part of a managed drainage system.

    Its unique formulation contains polymer additives, specially blended cements and recycled glass providing an eco-friendly layer. The product is ideal for problem areas such as tree pits, footways and driveways.

  • Ultra Scape Pro-Prime - Slurry Primer

    Ultra Scape Pro-Prime – Slurry Primer

    Ultra Scape Pro-Prime – Slurry Primer is specifically formulated to provide exceptional bond between all types of stone surfaces and bedding concretes.

    The use of Ultrascape Pro-Prime in conjunction with Ultrascape Pro-Bed HS ensures full and even contact will be made with aggregate particles as well as promoting adhesion to greater than 2N/mm2 as per the requirements of BS 7533.

  • Ultra Scape-i-fix Speedy Paving Grout

    Ultra Scape Paving Guard

    Ultra Scape Paving Guard is suitable for use on most paving types and in most commercial environments including town centres, public squares, pedestrianised areas, driveways and car parks.

    The product is an acrylic polyurethane hybrid and as such provides for both a user-friendly application and an extremely robust and durable finish, normally only achieved with solvent stabilised products.

  • Ultra Scape Flowpoint ECO

    Ultra Scape Flowpoint ECO

    Ultra Scape Flowpoint ECO is ideal for all pavements where a rigid or bound void-free joint is required.

    The product is suitable for application in town centre pedestrian schemes, pathways and carriageways, and can be used with natural stone, concrete flags and clay paviours.