Stone & Brick Restoration & Structural Reinforcement

  • The official logo of Remmers

    Aida Sulfatex Liquid

    Aida Sulfatex Liquid converts sulphates into compounds that are difficult to dissolve.

    The material is formulated weakly acidic which dissolves lime residue and mortar dust on the stone surface and forms stable lime compounds in edge areas.

  • The official logo of Belzona

    Belzona 5811

    Belzona 5811 is a 2-part epoxy coating which provides outstanding chemical resistance and protects equipment operating under immersion in aqueous solutions up to 50°C (122°F) from the effects of corrosion.

  • Flexipoint

    Flexipoint is a single component, cement based material incorporating the latest polymer and metakaolin technology, which is mixed with water to produce a pointing mortar for rapid application by gun or trowel.

    The specially selected aggregates are graded to prevent segregation and locking under pressure, giving smooth application with a high quality finish.

  • The official logo of Remmers

    Funcosil Restoration Mortar “cement free”

    Funcosil Restoration Mortar “cement free” physical characteristics correspond to the requirement for the least possible inherent stress.

    Due to its low compressive and tensile bending strength and low E-modulus, it is particularly suitable for substrates of lesser strength. The “normal” grains of the aggregates (≤ 0.5 mm) correspond in general to that of fine-grained sandstone.

  • Helifix-HeliBar-Remedial

    Helifix CemTie

    Helifix CemTie is used for stabilising solid or rubble filled walls, reinstating failed lintels (when combined with Helibeam techniques), securing multi-layer brick rings in bridges, tunnels and arches & for reconnecting separated internal and external building walls.

  • Helifix-CrackStitch

    Helifix Crack Stitching

    Helifix Crack Stitching is used for rapid and permanent solution to cracked masonry.

    Helifix Crack Stitching suitable for all forms of masonry structure.

  • Helifix-DryFix

    Helifix DryFix

    Helifix DryFix is used as a versatile replacement for a wall tie, for securing multiple layers of masonry & for pinning delicate masonry features.

  • Helifix-HeliBar-Remedial

    Helifix HeliBar

    Helifix HeliBar is used for crack stitching, lintel repair and creation, forming deep masonry beams & for horizontal structural restraint (when used with BowTie systems).

  • Helifix-Helifibeam-system

    Helifix Helibeam System

    The Helifix Helibeam System comprises of pairs of long HeliBars that are bonded into cut slots to form deep masonry beams that reinforce and stabilise the existing masonry and redistribute structural loads.

    In combination with other Helifix ties and fixings, the Helibeam System provides a comprehensive, reliable and economic system of repair and stabilisation for many commonly occurring structural faults.

  • helifix_retrotie

    Helifix RetroTie

    Helifix RetroTie is effective in all common building materials. It leaves buildings virtually unmarked and allows multiple drip points in order to prevent the transfer of water across the cavity.

  • The official logo of Sika

    Icosit EG1

    Icosit EG1 contains micaecous iron oxide providing a high build chemically and abrasion resistant coating direct to new or weathered galvanized and an intermediate coating for steel.

  • The official logo of Sika

    Icosit EG1 Rapid

    Icosit EG1 Rapid contains micaecous iron oxide for low temperatures, providing a high build chemically and abrasion resistant coating direct to new or weathered galvanized and an intermediate coating for steel.