Waterproofing

  • Everbuild-202-Integral-Waterproofer

    202 Integral Liquid Waterproofer

    202 Integral Liquid Waterproofer is suitable for all applications where resistance to water damage is necessary, such as pool and tank linings, roof areas, external rendering/point and structures below ground level.

  • Everbuild-204-Evermix-3-in-1

    204 Evermix 3 In 1

    204 Evermix 3 In 1 is particularly formulated for use in renders, dry dash and pebble-dashing, however it can also be used in any cement mixture where waterproofing and increased workability are required in conjunction with retarded setting.

  • Everbuild-Water-Seal

    402 Waterseal

    402 Waterseal

  • Everbuild-408-Super-Seal

    408 Super Seal

    408 Super Seal penetrates deep into the treated area and actually chemically bonds to the surface, providing effective water repellencey for many years.
    It is unaffected by ultra violet light and offers improved water beading when compared to other traditional solvent based products.

  • Everbuild-503-SBR-Bond

    503 SBR Bond

    503 SBR Bond has been designed specifically for use in the building industry as a general purpose bonding agent, and additive for concrete and plasters and as a multi-use adhesive.

  • The official logo of GRACE

    Adcor 500S

    Adcor 500S is a conformable, swellable polymer/butyl rubber waterstop strip that expands in contact with water.

    When fully encapsulated by poured concrete, the expansive forces form a seal against concrete faces. The seal resists hydrostatic pressure, stopping water from entering sub-structures.

  • The official logo of GRACE

    Adprufe 100

    Adprufe 100 is an innovative liquid admixture that significantly reduces both the permeability and drying shrinkage of concrete.

    By uniquely combining water repellent and shrinkage reduction technologies Adprufe 100 provides a hydrophobic and pore blocking system together with a proven and award winning chemistry that reduces the surface tension of the menisci in the millions of pores in the hardened concrete, thus significantly reducing the shrinkage strain.

  • The official logo of GRACE

    Aerofil 1

    Aerofil 1 is a white, inert, preformed, closed cell, polyethylene joint filler suitable for structural movement joints in concrete, brick and blockwork.

    Aerofil 1’s low compressive strength prevents the transfer of load across joint interfaces and makes it ideal for forming soft compression joints and expansion joints in brickwork facades.

  • The official logo of GRACE

    Aerofil 2

    Aerofil 2 is designed for water retaining structures such as reservoirs, sea walls subject to thermal movement and wave action, and heavily trafficked floors such as pedestrian areas, factory flooring and elevated structures.

    Aerofil 2’s high compressive strength and density combined with low load transfer characteristics make it ideal for creating joints in large in-situ concrete sections without distortion from wet concrete and vibrating techniques.

  • Aquaseal Bitumen Roof Repair Mastic

    Aquaseal Bitumen Roof Repair Mastic

    AQUASEAL BITUMEN ROOF REPAIR MASTIC is a Trowel Applied Bitumen Mastic.

  • The official logo of BASF

    Aquaseal Damp Block

    AQUASEAL HIGH PERFORMANCE INTERIOR DAMP STAIN BLOCK is used as a treatment of wall and ceilings when damp proofing treatment has been carried out and decorating needs to proceed before complete drying out of the substrate is possible.

  • Aquaseal Fast Drying Flashing and Roof Primer

    Aquaseal Fast Drying Flashing and Roof Primer

    AQUASEAL FAST DRYING FLASHING AND ROOF PRIMER is a High Quality Solvent Based Bituminous Primer.

  • Aquaseal Fast Drying Roof Waterproofer

    Aquaseal Fast Drying Roof Waterproofer

    AQUASEAL FAST DRYING ROOF WATERPROOFER is brush applied to damp or dry surfaces for the treatment of asphalt, concrete, fibre reinforced cement, metal, roofing felt or similar roofing materials whether flat or sloping.

  • The official logo of BASF

    Aquaseal Fibre Reinforced Aquaflex Roof Seal

    AQUASEAL FIBRE REINFORCED AQUAFLEX ACRYLIC ROOF SEAL is a hard wearing, highly flexible all weather application waterproofer for use on flat roofs, corrugated sheets, gutters, flashings, brickwork and slates.

  • Firmafix

    Aquaseal Firmafix

    AQUASEAL FIRMAFIX is a Cold Applied Roofing Felt Adhesive.

  • The official logo of BASF

    Aquaseal High Performance Interior Damp Stain Block

    AQUASEAL HIGH PERFORMANCE INTERIOR DAMP STAIN BLOCK is used for the Treatment of wall and ceilings when damp proofing treatment has been carried out and decorating needs to proceed before complete drying out of the substrate is possible.

  • The official logo of BASF

    Aquaseal High Performance Roof & Gutter Sealant

    AQUASEAL HIGH PERFORMANCE ROOF & GUTTER SEALANT is a One Part Elastomeric High Performance Roof Repair Compound.

  • The official logo of BASF

    Aquaseal High Performance Roof Liquid Felt

    As a roof waterproofer, AQUASEAL HIGH PERFORMANCE ROOF LIQUID FELT is suitable for the treatment of both new, and the refurbishment of existing roofs, whether flat or pitched.

  • Aquaseal-Hyband

    Aquaseal Hyband Self Adhesive Flashing Tape

    AQUASEAL HYBAND SELF ADHESIVE FLASHING TAPE is readily applied by hand pressure and its watertight grip grows stronger with time to ensure lasting adhesion.

  • Aquaseal Hyprufe D.P.M

    Aquaseal Hyprufe

    AQUASEAL HYPRUFE is a Bitumen/Rubber Latex Emulsion Damp Proof Membrane and Protective Coating.

  • aquaseal-bitumen-roof-repair-mastic

    Aquaseal Instant Roof Repair Mastic

    AQUASEAL INSTANT ROOF REPAIR MASTIC is a Instant Roof Repair, Stops Leaks Immediately even in Wet Conditions.

  • aquaseal black bitumen paint

    Aquaseal Protective Black Bitumen Paint

    AQUASEAL PROTECTIVE BLACK BITUMEN PAINT can be applied to most substrates, including iron and steel structures, metal fabrications, castings, asbestos cement sheeting, and structural concrete.

  • aquaseal-no1-roof-seal

    Aquaseal Single Coat Flexible Roof Seal

    AQUASEAL SINGLE COAT FLEXIBLE ROOF SEAL is a High Performance, Single Application, Flexible, Weather and Waterproof Coating for Roofs and Metal.

  • Aquaseal Solar Reflective Roof Coat

    Aquaseal Solar Reflective Roof Aluminium Paint

    AQUASEAL SOLAR REFLECTIVE ROOF ALUMINIUM PAINT may be applied to a wide range of substrates including metal and bitumen coatings together with roofing felt.

  • The official logo of BASF

    Aquaseal Solvent Free Roof Waterproofer

    As a roof waterproofer AQUASEAL SOLVENT FREE ROOF WATERPROOFER is brush applied for the treatment of asphalt, concrete, fibre reinforced cement, metal, roofing felt and similar roof surfaces whether flat, sloping or vertical.

  • The official logo of Everbuild

    Aquaseal Waterproof Tanking Primer

    Aquaseal Waterproof Tanking Primer

  • Aquatek Plug XS

    Aquatek Plug XS is a fast setting plugging mortar with extended set time.

  • The official logo of Belzona

    Belzona 3111

    Belzona 3111 is a cold applied liquid coating for long-term roof protection, providing outstanding waterproofing and weatherproofing properties.

  • The official logo of Belzona

    Belzona 3121

    Belzona 3121 is a 2-part polymer composite designed to provide emergency roof repair and weatherproofing for leaking roof areas.

  • The official logo of Belzona

    Belzona 3211

    Belzona 3211 is a water-based acrylic emulsion membrane incorporating a polymer bonded glass reinforcing sheet (Belzona 9321) designed to provide seamless, flexible protection to all types of thermal insulation and cladding systems.

  • The official logo of GRACE

    Betec 350

    Betec 350 is a rapid setting, high strength, waterproof compound used to seal tie-holes that are created by formwork tie bars.

  • The official logo of GRACE

    BETEC Flex

    BETEC Flex comprises a liquid polymer A component and a special cement based powder B component.

    The two components are mixed together with a slow speed drill and paddle to form a smooth slurry. The slurry is applied by trowel or bursh, in two coats, to horizontal and vertical surfaces and dries to form a hard but flexible waterproof cementitious coating.

  • The official logo of GRACE

    BETEC Plug 1

    BETEC Plug 1 is a single-component, quick-setting, waterproofing plugging compound supplied in 5 kg plastic buckets.

    When mixed with water, a plastic, highly workable mortar is formed which can be applied by hand to plug leaks in concrete and masonry structures.

  • The official logo of GRACE

    BETEC Seal

    BETEC Seal is mixed with water using a slow speed drill and paddle to form a smooth slurry.

    The slurry is applied by brush or trowel, in two or three coats, to horizontal and vertical surfaces and dries to form a hard, durable, waterproof cementitious coating.

  • The official logo of GRACE

    Bituthene 2000

    Bituthene 2000 is flexible (it accommodates shrinkage movement), cold applied (no heating, simple, low labour cost), self adhesive (full continuity at overlaps) and it is also made from rubber/bitumen (allowing flexibility and resistance to most dilute acids and alkalis).

  • The official logo of GRACE

    Bituthene 4000

    View the supplied Bituthene 4000 technical data sheet in order to view additional information about the material within this system.