Description:

ARDEX E 100 is an acrylic-based dispersion for use in screeding and rendering mortars in internal and external locations. The addition of ARDEX E 100 improves the compressive and tensile strengths, and elasticity and bond strength of the modified mortar. The workability and plastic properties of the mortar are improved without increasing the water/cement ratio, and early age crack formation is significantly reduced.

ARDEX E 100 is also designed for use in the bonding slurry/grout mortar mixture for ARDEX A 38 Rapid Hardening and Drying Cement for Floor Screeds.

Features:

•  Improves the elasticity and the compressive and tensile strengths of the modified mortar
•  Improves the workability and plastic properties of the mortar without increasing the water content.
•  Allows bonded cement and sand screeds to be applied at as little as 15mm thickness
•  Reduces early age crack formation and surface dusting of screeds, whilst increasing their abrasion resistance
•  Use with ARDEX A 38 Screeding Cement as a bonding slurry /grout
•  For internal and external use

Use:

ARDEX E 100 is used in bonding grouts or slurry coats, for the adhesion of bonded screeds in mortars based on ordinary Portland cements, masonry cements, cement/lime and bonded renders, to cementitious backgrounds.

ARDEX E 100 can also be used as an additive to:

•  Improve workability without increasing the water content of mortars.
•  Increase the compressive and tensile bending strengths of the hardened mortars.
•  Improve the elasticity and reduce crack formation in mortars.
•  Reduce surface dusting of screeds and renders while increasing their abrasion resistance.
•  Enable the minimum thickness of the modified bonded Portland cement floor screed to be reduced to 15mm from the recommended 25mm minimum thickness for unmodified screed mortars.