Description

Nitoseal MS300 is a one part, high modulus sealant based on hybrid silyl modified polyether technology. It has a rapid rate of cure and forms a tough elastomer capable of supporting heavy wheel loads. Nitoseal MS300 may be applied between 6mm and 20mm wide, for internal trafficked flush joints and up to 40mm wide, for non-trafficked / recessed trafficked joints. In most cases it is recommended to form a sealing slot with a square crosssection, subject to a minimum 10mm depth. To ensure the sealant operates within its stated movement accommodation capacity the sealing slot widths should be designed in accordance with the recommendations of BS6093.

Uses

• Nitoseal MS300 is suitable for sealing saw-cut and movement joints in internal floors, and external joints where abrasion resistance is required. It can also be used for external facade joints where a tougher seal is required.
• Factory floors
• Sports stadia terracing
• Shopping centres
• Warehouse and distribution depots
• Concrete hardstanding areas
• Prisons

Advantages

• Suitable for forklift truck traffic
• Suitable for saw cut and perimeter joints
• Abrasion resistant
• Withstands vehicular traffic
• Single component
• Fast rate of cure
• Easy to apply at low temperature
• Can be applied to damp substrates
• Primer-less for most applications (see “Priming” section)
• Hard, but flexible sealant; resists picking and vandalism