Description:

RonaDeck Resin Bonded Pore Filler is a fast cure cementitious pore filler for filling pores and voids in the matrix of surfaces prior to the application of RonaDeck Resin Bonded Surfacing. It is used prior to the application of RonaDeck Resin Bonded Surfacing to fill holes and voids in the surface and considerably reduce the amount of RonaDeck Resin Bonded Surfacing Resin used on open texture surfaces.

RonaDeck Resin Bonded Pore Filler has excellent adhesion to bituminous and cementitious surfaces. The speed of RonaDeck Resin Bonded Pore Filler enables it to be overlaid within 1 – 2 hours at 10°C to 20°C. It is supplied as a two component product, powder and liquid. Surfaces on which RonaDeck Resin Bonded Pore Filler is applied must be well constructed, structurally stable with good cohesive strength and suitable to receive a bonded high strength surfacing. Weakness in or on the surface is likely to result in failure.

Features:

• scrape on/scrape off pore filler
• use prior to application of RonaDeck Resin Bonded Surfacing
• reduces amount of resin needed on open face surfaces
• quick curing
• allows overlay within 1-2 hours
• easy to use

Uses:

Refer to the RonaDeck Resin Bonded Surfacing data sheet for full information on surface preparation and testing. Repairs must be carried out with other materials before application. Surfaces must be cleaned of loose material, oil, grease and dampened with clean water prior to applying RonaDeck Resin Bonded Pore Filler.

Mixing
RonaDeck Resin Bonded Pore Filler can be mixed using a drill with suitable paddle attachment, in a forced action mixer or by hand. The working time is approximately 10-20 minutes at 20°C. Working time will be affected by material and ambient temperature and mixing time. It must be mixed close to the area of application so that it can be placed and finished before initial set. Excessive mixing should be avoided as this will generate a greater exotherm and accelerate the set.

To mix, place the RonaDeck Resin Bonded Pore Filler in to the mixer or mixing container, dry mix until components evenly dispersed then add the supplied gauging liquid and mix until a self-smoothing pouring consistency is produced. Mixing time should not be more than 2-3 minutes.

Laying
Using the edge of a trowel or squeegee blade, scrape apply the RonaDeck Resin Bonded Pore Filler to fill the pores – do not attempt to create a screed on the surface. Do not place any thickness on top of the substrate. Creating a thickness of RonaDeck Resin Bonded Pore Filler can result in early failure of the RonaDeck Resin Bonded Surfacing placed on top of it.

Curing
Allow RonaDeck Resin Bonded Pore Filler to cure for 1 hour (at 10-20°C) then apply RonaDeck Resin Bonded Surfacing. If more than 12 hours elapses clean the surface to ensure it is free of loose material and contamination.

Limitations
RonaDeck Resin Bonded Pore Filler is designed to fill open pores prior to the application of RonaDeck Resin Bonded Surfacing. It is not to be laid as a screed or to place any thickness on top of the existing surface.