Description

Solvent and styrene free, epoxy acrylate based, 2- component anchoring adhesive for normal/moderate climate conditions.

Uses

Sika AnchorFix®-2+ may only be used by experienced professionals.

As a fast curing anchoring adhesive for all grades of:

• Rebars / reinforcing steel
• Threaded rods
• Bolts and special fastening systems
• Concrete (in cracked and non-cracked)
• Solid masonry
• Steel
• Hard natural stone*
• Solid rock*

* These substrates may vary greatly, in particular with regard to strength, composition and porosity. Therefore, for each application the suitability of Sika AnchorFix®-2+ Adhesive must be tested by first applying the Product only to a sample area. Check in particular bond strength, surface staining and discoloration.

Benefits

• Fast curing
• Standard guns can be used
• High load capacity
• ETA to ETAG 001 for anchoring in concrete
• ETA to ETAG 001 for rebar connections
• Suitable for cracked concrete
• Drinking Water certified
• LEED Attestation available
• Non-sag, even overhead
• Styrene-free
• Low odour
• Low wastage
• Suitable in wet/damp but clean holes
• Marine enviroments