Sikafloor® Level-30 is a polymer modified, pumpable, self levelling fast drying cementitious screed for higher thickness interior or exterior floors, meeting the requirements of class R3 according to EN 1504-3.
If you are looking for a high-performance screed for your indoor and outdoor floors, you should consider Sikafloor Level-30. Pumpable and self-levelling, this screed is easy to use because it has self-smoothing qualities. You can create layers of between 4mm to 30mm in thickness, depending on the requirements of your floor surface.
Due to its high fluidity, the Sikafloor Level-30 screed is easy to apply via pump action or by hand, hence it's quite convenient for urgent floor work and repair activities. This screed also creates a good surface appearance and hardness, providing good workability and joint healing. Its fast-drying abilities mean that the floor will be ready in 3 or 4 hours after application.
The screed also doesn’t contain any casein and formaldehyde and has very low emissions, so it fully conforms to the EC1 safety regulations. To adapt to various weather changes, this screed boasts of excellent freeze-thaw salt resistance, so you shouldn't expect any cracks during adverse weather conditions. Combined with its low shrinkage properties, the screed is perfect for floors of all types and uses. In essence, you need this self-smoothing and fast-drying screed for your floors if quality and quick action are your priorities.
The safety standards of the Sikafloor Level-30 screed should be the least of your worries. First, it conforms to the EN 13813 CT – C40 – F10 – A12 requirements. As if that isn’t enough, the screed adheres to the requirements of EN 1504 and to the R3 requirements for mortar. To cast out any doubt, you will be glad to know that The Test Laboratory HARTL in Seyring, Austria carried out the initial type tests and factory production controls.
This product exists in powder form, and comes in standard grey. It's available in 25kg bags and has a shelf life of 9 months from the date of production if the seals remain undamaged and unopened. Remember to store it in dry conditions at temperatures of no less than 5°C and no more than 30°C.